GO600MA | Compressed Air Filters
GO SERIES Compressed Air Filters
New additional to the G Series, Mikropor GO Series compressed air filters are designed for easy element replacement “zero clearance” ability.
Features
The air filters have four efficiency ratings, removing contaminants as small as 0.01 micron at up to 290 psi (20bar)- 1/4″ to 3″ NPT/BSP pipe sizes. A protected auto drain (2 mm orifice) is standard for optimal and reliable removal of liquid contaminants.
These air filters have zero-porosity aluminium and durable epoxy powder-coat finish, along with a corrosion resistant internal coating for a long service life.
Filter combinations are configured to meet specific application requirements. Filters comply with PED and perform as per related ISO 8573 standards.
These filters may be equipped with differential pressure gauges for easy maintenance and energy efficiency. Mikropor compressed air filters are always recommended with this system.
Element Features
Mikropor offers Superior protection – from 1 micron to 0.01 micron. Durable element construction and efficient drain layer ensures continued performance with optimal element change intervals. Elements are also easy to replace with the head clips.
Mikropor Elements Have Been Designed for Easy Handling
1- Deep pleating also enables a lower pressure drop.
2- Supreme collapse resistance due to usage of fluted stainless tube, providing strength against pressure drops while improving the performance by passing air diagonally through the element.
3- PVC impregnated foam favors water/ oil drainage.
Head Clamping
Head clamping provides serial connection of filters without any extra piping
Drainage Ribs
Drainage Ribs favors the humidity flow.
Zero Clearance
A major innovation for servicing the zero clearance design gives a quicker, easier, simpler filter change, with no need for any specialist tools.
Anodising
Anodising provides supreme corrosion resistance. Anodised surface treatment is proven to be better than other surface treatment methods such as Alocrome coating.
Description
- Manufacturer: Mikropor
- Part Number: GO600MA
- Description: GO Series Compressed Air Filters
- Element Part Number: MO500A (Activated Carbon)
- Connection Size: 1-1/4″/ 1-1/2″
- Flow Rate (cfm): 353
- Flow Rate (m3/h): 600
- Maximum Working Pressure (bar): 20
- Particle Removal (Micron): 0.01
- Max. Oil Carryover at 21°C (mg/m3): 0.003
- Maximum Working Temperature (°C): 25
- Initial Pressure Loss (mbar): 80
- Pressure Loss for Element Change (mbar): 700
- Element Color Mode: Metal SS
- Dimension A, mm: 123
- Dimension B, mm: 45
- Dimension C, mm: 533
- Dimension D, mm: 497.5
- Dimension E, mm: 9
- Picture is for illustration purposes only
- Download datasheet for GO Series Compressed Air Filters
Reviews
There are no reviews yet.